How To Repair Samsung Smartwatch Gear S3 Lcd Screen With Water Damage

382024

Samsung s3 water damage

when i power on the phone it boots normaly

merely when it goes to samsung logo start blinking similar you open and close your eyes fast that kind of blink it works fine only screen won't cease blinking super fast .

i cleaned the phone with alcool but no luck

Is this a adept question?

Voted Undo

Score ane

ane Reply

Most Helpful Respond

Adrian Zymeri equally with any immersion, the importance is to non turn it on, or trying to sync/charge information technology, as this may increase the likelihood of shortcircuiting whatever components. Remove the battery, and detach it right downwardly to the motherboard . Use this guide to clean your phone. It was written for an iPhone but all the points still pertain to your phone every bit well. Clean everything with isopropyl booze (at least 90%+) and a soft castor, including all connectors and cable ends. Check for whatsoever burned or missing components. You lot may have to repeat this step a couple of times. One time it is cleaned, reassemble it and replace the bombardment, then reevaluate for whatsoever existent damage. Your phone could have a damaged backlight circuitry component as well as a shorted LCD and plenty of other things in between. Sometimes posting some images of your board with your question helps others to identify a damaged component. Apply this guide for that. Water damage is the hardest to repair since about any part tin can have failed.

Was this answer helpful?

Voted Undo

Score 1

Source: https://www.ifixit.com/Answers/View/382024/Samsung+s3+water+damage

Posted by: pollitthicand.blogspot.com

Share this post