How To Repair A Ice Maker On A Refrigerator

Ice Maker Repair Tips

Updated: December. xx, 2022

Installing a replacement icemaker is simple.

FH08FEB_REPICE_01-2 Family Handyman

No ice cubes to absurd your beverage because your refrigerator icemaker is on the fritz? You can buy a replacement icemaker and install information technology without breaking a sweat. It's elementary.

You might also similar: TBD

Install a new icemaker

icemaker troubleshooting

Photograph one: Remove screws on old icemaker

Apply a nut driver or a long screwdriver to remove the screws that hold the icemaker in place.

Photo ii: Plug wiring harness together

Line up the wiring harnesses and plug them together before screwing the icemaker in place.

Photograph 3: Install new inlet valve

Remove the old inlet valve and plug in the new 1, so attach it to the frame.

icemaker troubleshooting

Photo 4: Attach water line

Push button the water supply from the inlet valve onto the barbed fitting at the height of the fridge.

If your icemaker stops working, there's no need to call the appliance repair service. First, do some icemaker troubleshooting. Locate the saddle valve that's clamped to the house water supply and turn it off and on a few times to break up any mineral buildup clogging the valve. If that doesn't work, unplug the refrigerator and remove the icemaker (Photo 1) to make certain the water inlet at the back of the refrigerator isn't plugged with ice (but estrus it with a pilus dryer if it is). All the same, if the water supply isn't blocked and the refrigerator is older, information technology's time to supersede the icemaker. According to apparatus repair pros, most icemakers pause down long before the fridge. The expert news is that well-nigh replacement kits are simple to install.

Locate the model number on the wall of the refrigerator merely inside the door, then buy a new icemaker at an appliance shop or online (practice a search for "apparatus parts").

Unplug the refrigerator and plough the water off, then take the sometime icemaker out and disconnect the wiring. Plug the new icemaker in (Photograph ii), hold it in position and screw it to the refrigerator wall. Pull the fridge out from the wall, disconnect the water supply from the inlet valve at the bottom of the refrigerator, then replace the onetime inlet valve (Photo iii). Inlet valves should exist replaced when the icemaker is replaced, and are usually included with replacement kits. If not, social club it separately.

Before you push the refrigerator dorsum, plough the water on and check for leaks.

Required Tools for this Project

Have the necessary tools for this DIY project lined upward before yous first—you lot'll save time and frustration.

Originally Published: December 19, 2022